Are you ready for a punch needle trip? Here is the list of tools, and I will teach you how to use them.
Needle
The needle is the most essential tool for your punch needle trip. There are many different types of needles on the market, some longer and some made of wood.
Today, let us look at the adjustable needle (You can also buy it on our website).
The needle has four gears (A, B, C, D). The gear position adjusts the length of the needle tube, which controls the height of the coil that is poked out. It is easy for a beginner to use, and once you get this needle, you can use it forever. It is suitable for almost every punch needle art process.
You may also want to know how to use it. Let’s continue reading.
How to use this type of needle?
First, pass the wire through the round hole on the tip of the needle.
Next, put the wire into the needle until the wire loop emerges from the top of the needle, and then pass the yarn you want to use through the wire loop.
Then, pull the wire loop. Then, the yarn will come out of the round hole at the tip of the needle.
Finally, pull the yarn at the top of the needle back, usually leaving about 5 cm of yarn in front of the needle tube.
About the needle gear
D is the shortest gear, and A is the most extended gear. Press the knob at the back to change the gear at will. Changing the gear can change the length of the needle. The longer the needle is, the longer the loop will be. When processed, the needle must be poked to the bottom.
The effect on the front is flat, and the effect on the back is determined by the needle gear. If you want to make a fine coil, remember to use a short gear!
Monk cloth
Its criss-cross texture makes it very suitable for punch needle embroidery art.
If you bought the punch needle kit in our store, it is included in your set.
Embroidery hoop
There are two common types of embroidery hoops: round plastic embroidery hoops and imitation wood grain resin embroidery hoops.
About the round plastic embroidery hoop
You need to unscrew the screws on the top, separate the two frames, cover the small round frame inside with the embroidery cloth, and then cover the outer embroidery frame with the monk cloth. Finally, tighten the screws on the top and tighten the monk cloth.
About the imitation wood grain resin embroidery hoop
It is elastic. You need to open the outer rubber ring and cover the smaller plastic ring with monk cloth, then put the rubber ring in and adjust the monk cloth.
Scissors
Scissors are used to trim yarn and excess thread.
And last but not least, yarn.
These are all the essential tools you need to make punch needle embroidery art.
Make it now!
Our store has all you need to punch a needle!